SUPPLY & FIT · DUNFERMLINE & FIFE
MEDIUM URGENCY DALGETY BAY · KY11

Uneven subfloor in Dalgety Bay? Fix it before the new floor goes down

Uneven subfloors are the single most common reason cheap flooring fails inside two years — and Dalgety Bay's off-level screed pours from the 80s and 90s are all classic culprits. We survey the floor properly, latex-level or sister-joist as required, then quote the finished floor — never the other way round.

Common across KY11 — modern new-build housing here shows this pattern most often.

COST

£8–£16 per sqm for latex levelling; joist repair from £180

TIMEFRAME

1 day for levelling + 24hr cure, before the finish floor goes down

DIFFICULTY

Specialist fitters only

Why this matters

Fitting hard flooring over an uneven subfloor is the #1 cause of premature failure — most warranties are void if it's out of spec.

Symptoms we look for

Match two or more of these and it's very likely uneven subfloor.

  • 01
    New laminate or LVT clicks apart at the joints within months
  • 02
    A marble rolls visibly across the floor
  • 03
    Uneven wear stripes across an old carpet
  • 04
    Doors that catch or scrape in one corner of the room
  • 05
    Skirting boards showing a widening gap along one wall

What causes it

CAUSE 1

Screed poured off-level in 1970s–90s builds

CAUSE 2

Sagging joists in period properties

CAUSE 3

Localised damp or historic settlement

CAUSE 4

Old thermoplastic tile beds still in place under carpet

Affects: Concrete slab · Screed · Chipboard deck · Original pine boards

"Not sure if it's really uneven subfloor? We diagnose in Dalgety Bay for free — no obligation to fix with us."

How we fix it

  1. 1

    Survey with a 2m straight-edge and long spirit level, mapping the low points

  2. 2

    Grind or scarify high spots on concrete/screed

  3. 3

    Latex self-levelling compound (SLC) to bring the whole floor within tolerance

  4. 4

    For timber decks — sister-joist or over-board with 18mm ply as required

  5. 5

    Only then quote the finished floor — LVT, laminate, engineered wood or carpet

Where DIY goes wrong

RISK 1

Buying the wrong SLC grade — some need primer, some crack on flex

RISK 2

Levelling without addressing the underlying cause (damp, joist rot)

DALGETY BAY PROOF

Recent Dalgety Bay homeowners

"Was quoted a full re-lay by someone else in KY11 — these guys sorted it as a repair for a fraction."

Dalgety Bay homeowner

"Turned up in Dalgety Bay when they said, did the job in one visit, cleaned up after themselves."

Dalgety Bay homeowner

"Straight talk. Told us what was wrong, what would fix it, and what didn't need doing. Job done in Dalgety Bay."

Dalgety Bay homeowner

Uneven subfloor in Dalgety Bay — FAQs

Related services in Dalgety Bay

Fix uneven subfloor in Dalgety Bay — properly, first time.

KY11 · diagnostic visit · fixed quote · own fitters